Subscriber and Device Management

Subscriber management includes workflows associated with provisioning new subscribers, removing existing subscribers, and associating subscribers with slices.

Note

This section refers to a fully installed Aether GUI, properly secured and with Enterprises, Connectivity Services, and Sites already configured by a ROC Administrator. The examples shown below are taken from an example configuration (the so-called MEGA Patch, see Post a Mega-Patch) shipped with the ROC.

Provisioning a New Device

Before a Device can be granted connectivity service, it must first be provisioned. This step is normally performed by your Aether Operations team.

Each Device is assigned a PLMN and a set of security keys. Depending on the deployment scenario, these keys might be shared by several Devices, or they might be unique to each Device. The allocation of PLMNs and keys is currently performed manually by the Aether Operations team. This subscriber-related detail is configured via the SIM Management application, simapp.

As described in the OnRamp Guide, the subscribers section of the values file needs to be edited to include the new Device IMSIs:

simapp:
 ...
   subscribers:
   - ueId-start: 123456789123458
      ueId-end: 123456789123458
      plmnId: 20893
      opc: 8e27b6af0e692e750f32667a3b14605d
      key: 8baf473f2f8fd09487cccbd7097c6862
      sequenceNumber: 16f3b3f70fc2
   - ueId-start: 123456789123460
      ueId-end: 123456789123465
      plmnId: 20893
      opc: 8e27b6af0e692e750f32667a3b14605d
      key: 8baf473f2f8fd09487cccbd7097c6862
      sequenceNumber: 16f3b3f70fc2

Configure Connectivity Service for a New Device

To activate connectivity service, the following steps are necessary:

The Sim-Card for the Device must be created.
The Device must be created and associated with the Sim-Card.
The Device must be added to a Device-Group.

Create the Sim-Card

Note

If Simapp integration has been enabled on the site, then new Sim-Cards will automatically be added to the Site as the operations staff provisions the SIM Cards. In that case, the Sim-Card object will already be present, and this section may be skipped.

Start by bringing up the Sim-Card list:

Click the add button to add a new Sim-Card:

Select an Enterprise and Site where the Sim-Card will belong. Give the Sim-Card a unique ID. You must also set the IMSI for the Sim-Card, which should have been provided by the operations team. All other fields, including the ICCID, are optional. Update and Commit the changes when you are finished.

Creating the Device

To create the Device, start by navigating to the Device list:

Click the add button to add a new Device:

Select an Enterprise and Site where the Device will belong. Give the Device a unique ID and select a Sim-Card to associate with the Device. It is allowed to create the Device with no Sim-Card, in case you want to associate the Sim-Card at a later date. All other fields, including the IMEI, are optional. Update and Commit the changes when you are finished.

Adding the Device to the Device-Group

An Enterprise is typically organized into one or more Sites, and each Site may contain one or more DeviceGroups. Navigate to the appropriate DeviceGroup associated with the Site you wish to deploy on, and add the Device's IMSI to the DeviceGroup.

The Site details can be seen by navigating to the Site list view.

Navigate to the Device Groups list view to see the list of Device Groups and their association to Sites.

In the Device-Group New York POS example above lists two devices: till-pos-1 and till-pos-2.

Note

A Device may participate in at most one DeviceGroup, and that DeviceGroup may participate in at most one Slice.

Editing

Edit the DeviceGroup by clicking on the Edit icon, and in the List page, adjust an existing Device ID range or create a new range (by clicking on the + icon).

The Device-Group page includes a list of devices that comprises the group. Each one may be individually enabled or disabled. Enable or disable is intended to temporarily limit connectivity; the device can also be permanently deleted. To add a device to the group, click the plus symbol next to the device, and then select an available device.

Note

While you are allowed to add a device to multiple device groups, this is not recommended.

When the entries on the DeviceGroup edit page are valid the Update will become available

Click this to add the changes to the Basket of configuration changes.
Observe that the Basket icon (2nd icon from top right) displays the number of changes.

Note

The changes are not committed to aether-config until the Basket is committed. This allows several changes to be gathered together in one transaction and checked before committing.

Remove Connectivity Service from an Existing Device

Navigate to the DeviceGroup that contains the Device, then remove that Device from the list. Once finished editing, proceed to the Basket View, inspect the changes, and Commit.

Note

The Device may continue to have connectivity until its next detach/attach cycle.

Create a New DeviceGroup

DeviceGroups allow Devices to be grouped and configured together. Each site comes preconfigured with a default DeviceGroup, but additional DeviceGroups may be created. For example, placing all IP Cameras in an "my-site-ip-cameras" DeviceGroup would allow you to manage all IP Cameras as an aggregate.

To add a DeviceGroup, navigate to the list of DeviceGroups and click Add in the upper right. (This will be grayed out if you do not have appropriate permissions.)

Specify a unique id for the DeviceGroup. 40 characters max and only alphanumeric and -, _ and . allowed.
Choose an Enterprise and Site from the preconfigured list. It will not be possible to add Devices until the Site is chosen.
Devices can be added at this stage or later.
As part of the DeviceGroup, you may select a maximum bitrate (MBR) that will be used for the devices in the group. This bitrate is applied separately to each device within the group; it is not an aggregate of all devices within the group. For more information see the section on QoS Metering.

Delete a DeviceGroup

If a DeviceGroup is no longer needed, it can be deleted. Deleting a DeviceGroup will not cause the Devices participating in the group to automatically be moved elsewhere.

Note

If a Device Group is being used by an existing Slice, then it cannot be removed. Delete the Slice first, and then the DeviceGroup.

A DeviceGroup can be deleted from the DeviceGroup list view, by clicking the trash can icon next to it. The deletion is added to the Basket directly. Navigate to the Basket View to commit the change.

Add a DeviceGroup to a Slice

To participate in the connectivity service, a DeviceGroup must be associated with a Slice.

Navigate to the Slice list view to see the list of Slice's and their associations to DeviceGroups.

To edit a Slice click on the edit button next to it in this list.

This brings up the Slice edit page where (among many other things) zero, one or many DeviceGroups can be associated with it.

Click the trash can symbol to remove a DeviceGroup from the Slice.
Click the + icon to add a DeviceGroup.
Click the Enable slider to Enable or Disable the DeviceGroup. (This is a way of disabling or reenabling the DeviceGroup within a Slice without having to remove it.)